月柿提取物体外抗氧化活性研究

目的以月柿提取物为原料,研究其对2,2-联苯基-1-苦基肼基(1,1-diphenyl-2-picrylhydrazyl,DPPH)自由基的清除能力,并测定其多酚类物质没食子酸的含量。方法检测波长为518 nm,反应时间为40 min条件下,以IC_(50)值(清除率为50%时,抗氧化剂的浓度值)作为抗氧化能力评价指标,并采用高效液相色谱法测定其没食子酸含量。结果月柿提取物对于DPPH自由基有良好的清除作用,其IC50值为0.1868 mg/mL,与常用抗氧化剂作用相当,且月柿提取物中没食子酸含量为1.65 g/kg。结论月柿提取物具有很强抗氧化活性,作为化妆品及功能性食品原料有广阔的开发前景。     

煤粉锅炉脱硫系统中除尘器压差过高原因及解决方案

高倍率灰钙循环烟气脱硫技术在神东矿区的煤粉锅炉环保改造项目中已投入建设并成功运行,脱硫率可达95%以上。在NGD系统的运行调试期,布袋除尘器压差的数值及其上升速度均较改造前有大幅提高,影响了锅炉系统的正常运行并降低了布袋除尘器的运行效率。为了解决此问题,先分析滤料透气性降低而导致布袋除尘器压差上升的根本原因,再结合现场调研情况对NGD系统工况下的烟气含湿量、烟气温度、烟气灰浓度、除尘器本体的问题以及上游锅炉系统问题逐一进行对比和分析,并找出问题产生的各主要因素。NGD系统中布袋除尘器差压升高的原因包括多方面,为了使NGD系统的运行更加稳定,需要使除尘器适应NGD系统的工况并对系统中部分设备进行改造。在未来NGD系统的设计中,布袋除尘器需按高浓度烟气设计,且针对煤粉工业锅炉的运行、维护特性应加入对烟气中含水量的监测及对布袋除尘器的相应保护措施。     

Nonzero repair times dependent on the failure hazard

It is common in the literature on the reliability and maintenance of repairable systems to model the repair times as instantaneous. However, this is an unreasonable assumption for some complex systems, especially those requiring a high level of reliability, and such systems may spend a significant proportion of their lifetimes under maintenance and repair. We model the ageing of such a system with alternating stochastic processes. Operational times are generated at random and may have an increasing failure rate. Repair times are generated from a random process where the repair time is related to the hazard rate at failure. This yields lengthened repair times at late stages in a system subject to an increasing failure hazard rate but also accommodates long repair times at young ages in systems with a bathtub-shaped hazard rate function. We derive analytic results for a set of special cases of the model, show how simulation and inference can be carried out, and apply our method to real data from a large car manufacturer.     

某钒钛磁铁精矿深度还原-磁选试验研究

以河北承德某铁品位为61.08%，TiO2品位为7.66%的钒钛磁铁精矿为研究对象，进行了钒钛磁铁精矿深度还原-磁选试验研究。考察了还原温度、还原时间、C/O摩尔比、CaCO3添加量对还原产物和分选指标的影响。在还原温度为1350℃、还原时间120min、C/O摩尔比2.5、CaCO3添加量为16%、磁选场强为85mT的条件下，可以得到全铁品位为87.19%、铁回收率为82.62%的磁性产品和TiO2品位18.76%、TiO2回收率为79.40%非磁性产品。由还原产物的金属化率与XRD分析得知，钛磁铁矿向铁氧化物、钛氧化物和金属铁的转化较难发生，适当增加CaCO3的用量，能促进钛磁铁矿向CaTiO3、铁氧化物和金属铁的转化。      

可控中子孔隙度测井仪器设计

源距与屏蔽体厚度是直接影响可控中子孔隙度测井仪器测量准确性的重要参数。源距不仅影响测井仪器的测量误差，还影响测井仪器对地层孔隙度的灵敏度。屏蔽体厚度是保障测井响应完全反映地层的重要参数。从灵敏度、屏蔽率以及误差3个方面确定可控中子孔隙度测井仪器的源距与屏蔽体厚度。研究结果表明:近探测器源距越小，测井仪器灵敏度越高；近远探测器的间距对测量误差的影响随间距的增大，先减小再增大；当屏蔽率在70%以上且屏蔽率随厚度的变化较为缓慢时的屏蔽体厚度可作为屏蔽体最低厚度。     

A novel low-latency DRAM based on the bitline-discharge rate

As well known by computer architects, the performance gap between the processor and the memory has been increasing over the years. This causes what is known as the memory wall. In order to alleviate the problem, a novel fast readout scheme is proposed in this article for the single-transistor single-capacitor dynamic random-access memory (1T-1C DRAM) cells. The proposed scheme works in the current domain in which the difference between the discharging rates of the bitline in the cases of ‘1’ and ‘0’ readings is detected. The proposed scheme is analysed quantitatively and compared with the conventional readout scheme. It is verified by simulation adopting the 45 nm CMOS Berkley predictive-technology model (BPTM) and shows 44 and 7.7% reductions in the average read-access and cycle times, respectively, as compared to the conventional readout scheme. It is also shown that the power is saved according to the proposed scheme if the probability of occurrence of ‘0’ storage exceeds 66.7%. This minimum value can be alleviated, however, at the expense of a smaller saving in the average read-access time. The impacts of process variations and technology scaling are also taken into account.     

间隙配合变轨距轮对与轨道间瞬态滚滑接触模拟研究

变轨距技术是实现不同轨距铁路联运的重要手段，我国相关研究仍在起步阶段。基于显式有限元法，建立包含渐开线花键副的三维变轨距轮对-轨道耦合瞬态分析模型，于时域内模拟速度高至400 km/h下的瞬态轮轨滚滑和花键间动态接触行为及其相互影响。模型充分考虑轮轨和花键副三维几何、系统高频结构振动等，引入时变牵引/制动转矩，采用集成库仑摩擦定律的"面-面"接触算法求解轮轨接触和花键接触。假设圆柱直齿渐开线花键，齿数取32，齿侧间隙恒0.1 mm，无激励下模拟结果表明，花键副的存在使得轮轨力波动范围大于传统轮对，例如，400 km/h下法向轮轨力波动幅值增加静载的3.7%。时速400 km/h和牵引系数0.05下，内外花键的径向和角向偏置使得花键左、右两侧各存在1个位置相对固定的承载区，各涉及5~6个键齿，承载面分别为II和I键齿工作面。瞬态法、切向接触应力极值发生在靠近一系悬挂侧的齿根或齿顶部，典型值分别为102 MPa和4.6 MPa，任一键齿的应力极值因不断有键齿进出承载区而波动上升和下降。牵引系数0.3时，左侧承载区消失，右侧承载区扩至18个键齿，相同时刻下的法、切向接触应力极值因承载齿数和总接触面积增加变为89 MPa和5.2 MPa。为变轨距机构中花键的强度和动力学分析及相关设计提供精确模拟手段。     

Effect of Cultivation Parameters on Fermentation and Hydrogen Production in the Phylum Thermotogae

The phylum Thermotogae is composed of a single class (Thermotogae), 4 orders (Thermotogales, Kosmotogales, Petrotogales, Mesoaciditogales), 5 families (Thermatogaceae, Fervidobacteriaceae, Kosmotogaceae, Petrotogaceae, Mesoaciditogaceae), and 13 genera. They have been isolated from extremely hot environments whose characteristics are reflected in the metabolic and phenotypic properties of the Thermotogae species. The metabolic versatility of Thermotogae members leads to a pool of high value-added products with application potentials in many industry fields. The low risk of contamination associated with their extreme culture conditions has made most species of the phylum attractive candidates in biotechnological processes. Almost all members of the phylum, especially those in the order Thermotogales, can produce bio-hydrogen from a variety of simple and complex sugars with yields close to the theoretical Thauer limit of 4 mol H₂/mol consumed glucose. Acetate, lactate, and L-alanine are the major organic end products. Thermotagae fermentation processes are influenced by various factors, such as hydrogen partial pressure, agitation, gas sparging, culture/headspace ratio, inoculum, pH, temperature, nitrogen sources, sulfur sources, inorganic compounds, metal ions, etc. Optimization of these parameters will help to fully unleash the biotechnological potentials of Thermotogae and promote their applications in industry. This article gives an overview of how these operational parameters could impact Thermotogae fermentation in terms of sugar consumption, hydrogen yields, and organic acids production.     

Self-Adaptive Control System for Additive Manufacturing Using Double Electrode Micro Plasma Arc Welding

Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the con-trol system's performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part's layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.     

响应面法优化α-淀粉酶的酶反应体系

目的:采用单因素实验及响应面法优化α-淀粉酶的反应体系。方法:以淀粉为底物对象，以可溶性淀粉浓度、α-淀粉酶浓度、反应时间为考察因素，在单因素实验基础上，运用Box-behnken实验设计方法研究各因素及其交互作用对α-淀粉酶作用底物时的反应速度的影响。结果:建立α-淀粉酶酶反应体系的最佳反应条件为12.0 mg/mL可溶性淀粉、1.50 U/mL α-淀粉酶、10.0 min反应时间，在此条件下，α-淀粉酶表现出的反应速度达到（19.53±1.74） mmol/（L·min），接近模型中的预测数值18.75 mmol/（L·min）。结论:此优化α-淀粉酶酶反应体系的方法可行，能够使α-淀粉酶在反应过程中发挥的酶活最大化，为日后在此体系下进行糖苷酶抑制剂的研究奠定了基础，具有一定的指导意义。